To Add Sequence Levels - Agilent Technologies 1670G Series User Manual

Logic analyzers

Hide thumbs Also See for 1670G Series:

Table of Contents

Using the Trigger Menu

Changing the Trigger Sequence

To add sequence levels

You can add sequence levels anywhere except after the final one.

1 In the Trigger menu, select the number beside the sequence level

just after where you want to insert.

For example, if you want to insert a sequence level between levels 1

and 2, you would select level 2. To insert levels at the beginning, select

A Sequence Level pop-up appears. Its exact contents depend on the

analyzer configuration and the level specification. However, all

Sequence Level pop-ups have an Insert Level field in the upper left

2 Select Insert Level.

Another pop-up offers the choices of Cancel, Before, or After. If the

level you started from was the last level, After will not appear.

3 Select Before.

The Trigger Function pop-up replaces the Sequence Level pop-up. The

functions available depend on whether the analyzer is configured as

state or timing.

4 Use the knob to highlight a trigger function, and select Done.

A new Sequence level pop-up appears. Its contents reflect the trigger

function you just selected. The figure below shows a user trigger

function for a state analyzer.