Agilent Technologies 1670G Series User Manual page 250

Logic Analyzer Reference
Probing
The Termination Adapter
The logic analyzer must be properly terminated to operate correctly.
Most Agilent Technologies analysis probes have properly terminated
state connectors; however, many of them require termination adapters
for the timing connectors.
The optional termination adapter lets you connect the logic analyzer
probe cables directly to test ports on your target system without the
probes.
The termination adapter is designed to connect to a 20-position
(2x10), 4-wall, low-profile, header connector which is a 3M-Series 3592
or equivalent.
Termination Adapter
250