Agilent Technologies 1670G Series User Manual page 127

Logic analyzers

Hide thumbs Also See for 1670G Series:

Table of Contents

Triggering Examples

Cross-Arming Trigger Examples

7 Check that the second analyzer is triggering on arm and that

Count Time is set.

After the measurement is complete, you can interleave the trace lists of

both state analyzers to see the activity executed by both coprocessors

during related clock cycles.

You can use a similar procedure if you have only one processor, but

want to monitor its activity with that of other system nodes, such as

chip-select lines, I/O activity, or behavior of a watchdog timer. In some

instances it may be easier to look at related activity with a timing

Troubleshooting