Communication Ports; Safety Symbols And Definitions; For Further Assistance - GE UR Series Manual

CHAPTER 1: INTRODUCTION

1.3 Communication ports

URs are equipped with an RS232 port on the faceplate, and at the rear an RS485 port, an IRIG-B input port, and three
Ethernet ports. The Ethernet ports are a combination of 100Base-TX and 100Base-FX depending on the order code option.
See the relevant Instruction Manual for information on these ports.

1.4 Safety symbols and definitions

Before attempting to install or use the device, review all safety indicators in this document to help prevent injury,
equipment damage, or downtime.
The following safety and equipment symbols are used in this document.
Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
Indicates practices not related to personal injury.
See the Instruction Manual for safety information.

1.5 For further assistance

For product support, contact the information and call center as follows:
GE Digital Energy
650 Markland Street
Markham, Ontario
Canada L6C 0M1
Worldwide telephone: +1 905 927 7070
Europe/Middle East/Africa telephone: +34 94 485 88 54
North America toll-free: 1 800 547 8629
Fax: +1 905 927 5098
Worldwide e-mail: multilin.tech@ge.com
Europe e-mail: multilin.tech.euro@ge.com
Website: http://www.gedigitalenergy.com/multilin
UR SERIES – COMMUNICATIONS GUIDE
COMMUNICATION PORTS
1-13
1