GE UR Series Manual page 361

CHAPTER 3: IEC 61850 COMMUNICATION SCL LOG MESSAGES
NO CID File found in FLASH
This message is logged when the FLASH does not have a working copy of the CID file.
Error parsing SCL file
This message is logged when the parsing of the SCL file fails.
SCL Parsing Failed
This message is logged along with any of the other failures listed in this section.
SCL Parsing OK
This message is logged when the SCL parsing completes successfully.
3
g2_find_duplicate_sub_gcb: duplicate GCB=<name of the gcb> found in <logical device>/<variable name in
logical node>
This message is logged when duplicate GSEControl elements are detected. The GOOSE subscription parsing is in progress
at this stage.
g2_process_goose_extref: extref.iedName=<IED name> shall not be local IED
This message is logged when the iedName defined with extRefs is the target iedName. The GOOSE subscription parsing is
in progress at this stage.
g2_process_goose_extref: scl_server_find() fail, iedName=<IED name>
This message is logged when the iedName defined with extRefs is not found in the CID file. The GOOSE subscription
parsing is in progress at this stage.
g2_process_goose_extref: scl_gcb_find() fail, IED=<IED name of publisher>, srcLDInst=<LDInst>,
lnName=<lnName>, srcCBName=<srcCBName of extRef>
This message is logged when unable to find the associated gcb. The GOOSE subscription parsing is in progress at this
stage.
g2_process_goose_extref: scl_gse_find() fail, srcLDInst=<LDInst>, srcCBName=<srcCBName of extRef>
This message is logged when unable to find the associated gse. The GOOSE subscription parsing is in progress at this
stage.
g2_process_goose_extref: scl_dataset_find() fail, datSet=<datset from publisher gcb>
This message is logged when unable to find the associated dataset. The GOOSE subscription parsing is in progress at this
stage.
scl_dataset_check: too many FCDA in dataset=<datset name>
This message is logged when the FCDAs are more than the supported count. The GOOSE subscription parsing is in
progress at this stage.
FCDA: empty doName in =\<lnType><instance>\
This message is logged when empty doName is detected. The GOOSE subscription parsing is in progress at this stage.
FCDA: NO LNodeType=\<lnType><instance>\ found
This message is logged when no lnType associated with the logical node instance is found. The GOOSE subscription
parsing is in progress at this stage.
UR SERIES – COMMUNICATIONS GUIDE 3-145