Control (Ctrl) Logical Device; B90 Ct Trouble (B_Cttb); Fault Location (Fltrpt); Lln0 Data Objects And Attributes - GE UR Series Manual

MODEL IMPLEMENTATION CONFORMANCE STATEMENT (MICS)
WattPSDE#
LNName:
data attribute
data obj.
setSrcRef
setSrcCB

3.5.3 Control (Ctrl) logical device

The Ctrl logical device contains logical nodes that model UR control and monitoring functions.
The Ctrl logical device is available when the Advanced IEC 61850 option is purchased with the UR device.
3.5.3.1 Logical node zero (LLN0)
LLN0 is instantiated in all UR series devices implementing the Ctrl logical device.
3
Table 3-77: LLN0 data objects and attributes
LNName: LLN0
data obj. data attribute
NamPlt
vendor
swRev
configRev
ldNs
GrRef
setSrcRef

3.5.3.2 B90 CT trouble (B_CtTb)

This element is instantiated in the following products: B90.
Table 3-78: B90 CT trouble data objects
LNName: B_CtTbPIOC#
data attribute
data obj.
Op
general

3.5.3.3 Fault location (FltRpt)

This element is instantiated in the following products: C60, D30, D60, F35, F60, L30, L60, L90.
Table 3-79: Fault report settings data objects
FltRptRFLO#
LNName:
data attribute
data obj.
FltZ
cVal
cVal.mag.f
3-78
Prot
LDevice inst:
Type FC UR Name
SP WATTMETRIC GND FLT # BLK
ObjectReference
SP
ObjectReference
LDevice inst: Ctrl
Type FC UR Name
LPL
VISIBLE DC
STRING255
VISIBLE DC
STRING255
VISIBLE DC Ctrl configRev
STRING255
VISIBLE EX
STRING255
ORG
ObjectReference SP
LDevice inst: Ctrl
Type FC UR Name
ACT
ST CT TROUBLE ZONE# OP
BOOLEAN
Gen
LDevice inst:
Type FC UR Name
CMV
MX
Vector
FLOAT32
CHAPTER 3: IEC 61850 COMMUNICATION
Wattmetric Ground Fault # settings
UR element:
Description
Reference to the data attribute to input
Source GoCB of input if via GOOSE
Description
Logical node Prot configuration
information
Mapped to LPHD1/PhyNam.vendor
Mapped to LPHD1/PhyNam.swRev
The factory default value is the empty
string
IEC 61850-7-4:2007B
Reference to the next higher-level
logical device (LD)
In communications, the Master ldName
setting if not empty, otherwise the
concatenation of the IED name and
"Master".
In SCL, the concatenation of the IED
name and "Master".
UR element: B90 CT Trouble Zone element # function
Description
CT TROUBLE ZONE# OP operand
FAULT REPORT # settings
UR element:
Description
Mandatory data attribute which in this case
is fixed at zero
0
UR SERIES – COMMUNICATIONS GUIDE
R/W/C
R/C
R/C
R/W/C
R
R
R
R
R
R
R
R/W/C
R
R
R/W/C
R
R
R