Scl Implementation Conformance Statement (Sics) - GE UR Series Manual

CHAPTER 3: IEC 61850 COMMUNICATION
Data object CDC Semantics
name
Zero MV Analog 0 fixed operand
Zn1Extend SPS The zone 1 distance function must be set to the extended overreach value
Zn2Tr SPS Operated from overreaching zone 2 when reclosing the line

3.6 SCL implementation conformance statement (SICS)

The table outlines conformance to the Substation Configuration Language (SCL).
Table 3-119: SCL conformance statement
ICD Export
I11 Fix ICD file (no adaptable export needed)
I12 Export of ICD file or IID file according to IED
preconfiguration performed by tool
I13 State the data model name space (61850-7-3
subclause 7.2) within ICD file (LLN0.NamPlt.ldNs value)
I14 State the data model version (61850-7-3 subclause
7.8.3) and any predefined / fixed configuration values
within ICD file (9.5.4.4)
I15 Version 2003 export
I16 Version 2007 export
I17 Predefined data sets
I18 Predefined control blocks
I19 Substation bay template with IED part
I110 Communication section with default address
I111 Export correct valKind value (Table 46)
I112 Exports internal addresses as InRef or Input section
(subclause 9.3.13)
I113 Exports internal addresses in Input section with
expected serviceType (subclause 9.3.13)
I114 Exports in UTF-8 coding
SCD import
I21 Identify IED to be configured in SCD file by IED name
I22 Configure LD name (at least via ldInst, dependent on
the IED capabilities) and IED addresses from SCD
I23 Determine communication side addresses of IED inputs
from SCD
I24 Determine and use clock communication addresses
from SCD
I25 Configure values of (existing) control block from SCD
(9.3)
I26 Prepare (new) control block instances according to SCD
file
I26 Prepare / configure data sets according to SCD file
I28 Modify predefined data sets according to SCD
UR SERIES – COMMUNICATIONS GUIDE
SCL IMPLEMENTATION CONFORMANCE STATEMENT (SICS)
UR UR Setup Value/comments
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
If renamed Yes
CID
Yes Yes
IP address
is used to
locate the
IED name
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Used in logical
nodes...
Master/LLN0
Rec13pRREC
LinPkpPIOC
3
3-135