Enumeration: Trip Output Trip Reset Function; Enumeration: Login Roles; Enumeration: Modbus Login Roles; Enumeration: Autoreclose 1P 3P Mode Automated - GE UR Series Manual

MEMORY MAP
F607
ENUMERATION: OPEN POLE DETECTOR MODE
Enumeration Open Pole Mode
0 Accelerated
1 Traditional
2
F608
ENUMERATION: OPEN POLE DETECTION FUNCTION
Enumeration Open Pole Detection
0 I AND V AND CBaux
1 I AND V only
F609

ENUMERATION: TRIP OUTPUT TRIP RESET FUNCTION

Enumeration Trip Reset
0 Pole Curr OR Custom
1 CBaux OR Custom
2 Custom
F610
ENUMERATION: SINGLE-POLE AUTORECLOSE INITIATION
MODE
Enumeration Initiation mode
0 Protection AND CB
1 Protection only
F612
UR_UINT16: FLEXINTEGER PARAMETER
This 16-bit value corresponds to the Modbus address of the
selected FlexInteger parameter. Only certain values can be used
as FlexIntegers. There is no operation executed even though they
are called FlexIntegers.
F613
ENUMERATION: FIELD GROUND MODULE (FGM) INJECTION
CONNECTION TYPE
Enumeration Connection type
0 Single point
1 Double point
2-194
CHAPTER 2: MODBUS COMMUNICATION
F617

ENUMERATION: LOGIN ROLES

Enumeration Role
0 None
1 Administrator
2 Supervisor
3 Engineer
4 Operator
5 Factory
F618
BITFIED: SECURITY STATUS INDICATOR
Has been activated, whether the password has been set.
1 = Bit#0, Administrator password was set. The list is continued
for all other roles (Engineer = bit#2, Operator = bit#3, Observer =
bit#3).
F619
ENUMERATION: RADIUS AUTHENTICATION METHOD
0 = EAP-TTLS
F621

ENUMERATION: MODBUS LOGIN ROLES

Enumeration Role
0 None
1 Administrator
2 Supervisor
3 Engineer
4 Operator
5 Observer
F622

ENUMERATION: AUTORECLOSE 1P 3P MODE AUTOMATED

Enumeration Mode
0 Mode 1 (1 & 3 Pole)
1 Mode 2 (1 Pole)
2 Mode 3 (3 Pole - A)
3 Mode 4 (3 Pole - B)
UR SERIES – COMMUNICATIONS GUIDE