Sun Microsystems Netra T4 AC100 Service And System Reference Manual page 73

Netra T4 System-Specific OBDiag Self Tests (Continued)
TABLE 4-9
Test Test Function
i2c@1,30 I2C Self Test
network@5,1 RIO-GEM Self Test (10/100 Mbits)
parallel@1,300278 SuperI/O Self Test
pmc@1,300700
rtc@1,300070 SuperI/O Self Test
scsi@6 SCSI (53C875) Self Test
scsi@6,1 SCSI (53C875) Self Test
serial@1,400000 Serial (SAB 82532) Self Test
usb@5,3 RIO-USB Self Test
I2C bus test
PCI configuration space register test
RIO-GEM register test
Internal loopback (RIO-GEM level)
Internal loopback (Lucent 6612 PHY level)
External loopback (requires RJ45 loopback connector)
ECP and EPPP mode parallel port test (requires loopback
connector)
Advanced power controller/Real time clock (TOD) test
SCSI (53C875) register test
SCSI timer test
SCSI DMA test
SCSI loopback test
SCSI wide transfer test
SCSI BIST test
SCSI (53C875) register test
SCSI timer test
SCSI DMA test
SCSI loopback test
SCSI wide transfer test
SCSI BIST test
Internal loopback test
External loopback test
PCI configuration space register test
USB HCI register test
Reset test
Chapter 4 Troubleshooting 4-21