Page 2
Sun, Sun Microsystems, the Sun logo, SunDocs, Netra, and Solaris are trademarks, registered trademarks, or service marks of Sun Microsystems, Inc. in the U.S. and other countries. All SPARC trademarks are used under license and are trademarks or registered trademarks of SPARC International, Inc.
Installing DIMMs Note – Use only dual inline memory modules (DIMMs) that are specifically designed for the Netra™ T1 AC200 and DC200 servers. There are two DIMMs available: a 256 Mbyte DIMM (sales part number X7083A) and a 512 Mbyte DIMM (sales part number X7084).
Page 4
1. Power off your system and open the system unit. Remove the top cover by following the procedure described in the Netra T1 AC200 and DC200 Server User’s Guide (part number 806- 5978-10). Make sure you disconnect all power cables and wear an antistatic wrist strap.
Page 5
DIMM slots CPU fan Inserting a DIMM into Slot 0 Figure 1-2 5. Insert the DIMM into the first vacant socket. For illustrations of the correct insertion procedure, refer to the diagrams labeled “Memory insertion” inside the top cover of the system.
Page 6
You will hear a “click” when the DIMM is properly seated. 6. Detach the wrist strap and close the system unit. Replace the top cover by following the procedure described in the Netra T1 AC200 and DC200 Server User’s Guide (part number 806- 5978-10).
Page 7
Californie. UNIX est une marque déposée aux Etats-Unis et dans d’autres pays et licenciée exclusivement par X/Open Company, Ltd. Sun, Sun Microsystems, le logo Sun, SunDocs, Netra, et Solaris sont des marques de fabrique ou des marques déposées, ou marques de service, de Sun Microsystems, Inc. aux Etats-Unis et dans d’autres pays.
Page 8
A Sun Microsystems, Inc. Business 901 San Antonio Road Palo Alto, CA 94303-4900 USA 650 960-1300 fax 650 969-9131 Part Number: 806-6991-10 Revision A of October 2000...
Need help?
Do you have a question about the Netra T1 AC200 and is the answer not in the manual?
Questions and answers