Removing The Psu; Figure 6-1 Power Supply Unit - Sun Microsystems Netra T4 AC100 Service And System Reference Manual

2. If the system is running, shut it down and power off the system.
See Section 5.3.2, "Powering Off the System" on page 5-4.
FIGURE 6-1
6.1.2

Removing the PSU

1. Perform the appropriate steps listed in Section 6.1.1, "Preparation" on page 6-1.
2. Remove the power cord from the PSU.
3. Release the three captive Phillips screws (colored purple) located along the top of
the PSU that secure it to the system chassis.
6-2 Netra T4 AC100/DC100 Service and System Reference Manual • August 2001
Power Supply Unit