Sun Microsystems Netra T4 AC100 Service And System Reference Manual page 243

diag-level Variable Set to max (11 of 17)
CODE EXAMPLE E-1
{1}* P-Cache SnoopTags
{1}Test address up
{0}Test address line transitions
{1}Test address down
{0}* P-Cache SnoopTags
{1}Test cell disturbance
{0}Test address up
{1}Test data reliability
{0}Test address down
{0}Test cell disturbance
{1}Test address line transitions
{0}Test data reliability
{1}* P-Cache Status Data
{0}Test address line transitions
{1}Test address up
{0}* P-Cache Status Data
{1}Test address down
{0}Test address up
{1}Test cell disturbance
{0}Test address down
{1}Test data reliability
{0}Test cell disturbance
{1}Test address line transitions
{0}Test data reliability
{1}* P-Cache Init
{0}Test address line transitions
{1}* FPU Registers
{0}* P-Cache Init
{1}Test walking 1/0 FPU registers
{0}* FPU Registers
{0}Test walking 1/0 FPU registers
{1}Test register addressing
{1}* FSR
{0}Test register addressing
{1}Test walking 1 FSR register
{0}* FSR
{0}Test walking 1 FSR register
{1}* Ecache RAM
{0}* Ecache RAM
{1}Test address up
{0}Test address up
{1}Test address down
{0}Test address down
Appendix E Example POST Diagnostic Output E-11