9.1
PCI Cards
This section describes how to remove and fit a PCI card.
The PCI cards connector are located on the left hand side of the motherboard at the
rear of the chassis. PCI slots 1 through 3 (numbering from the left, viewed from the
front) accept long (64-bit) or short (32-bit) cards. PCI slot 4 can accept only short PCI
cards owing to the placement of the FC-AL backplane.
All slots support 33 MHz cards; slot 1 also supports 66 MHz cards.
FIGURE 9-1
9-2
Netra T4 AC100/DC100 Service and System Reference Manual • August 2001
PCI Card Slots
Need help?
Do you have a question about the Netra T4 AC100 and is the answer not in the manual?