System Description; System Features - Sun Microsystems Netra T4 AC100 Service And System Reference Manual

1
C H A P T E R

System Description

This chapter lists the main features of the Netra™ T4 AC100/DC100 server, and
describes the function of the LEDs located on the front and rear panels.
The chapter contains the following sections:
Section 1.1, "System Features" on page 1-1
Section 1.2, "System Unit Components" on page 1-5
Section 1.3, "Environmental Performance" on page 1-5
Section 1.4, "LEDs" on page 1-6
The Netra T4 server is a single or dual processor device that uses the
UltraSPARC™ III processor.
High performance processors
High performance disk, system, memory and I/O subsystems
High performance peripheral component interconnect (PCI) I/O
Rack mounting options
Front-to-back cooling
AC and DC power supply options
Alarms functionality for remote management
System configuration card
Hot swap disk drives
Visual diagnostics
Environmental monitoring
1.1

System Features

System unit components are housed in a 4RU rack-mounting enclosure designed to
NEBS Level 3 standards. Overall chassis dimension (width x depth x height) are
445.2 mm x 508.1 mm x 176.6 mm (17.52 in. x 20.00 in. x 6.95 in.). Flange mounting kits
are available for installing the system in 19-inch, 23-inch, 24-inch and 600-mm racks
(see ). A slide adaptor kit is also available.
FIGURE 2-1
1-1