Cisco ASA 5505 Configuration Manual page 1098

Configuring Basic Threat Detection Statistics
Configuring Basic Threat Detection Statistics
This section describes how to configure basic threat detection statistics, including enabling or disabling
it and changing the default limits.
Detailed Steps
To enable or disable basic threat detection, choose the Configuration > Firewall > Threat Detection
Step 1
pane, and check the Enable Basic Threat Detection check box.
Step 2 Click Apply.
Monitoring Basic Threat Detection Statistics
To monitor basic threat detection statistics, perform the following task:
Path
Home > Firewall Dashboard > Traffic Overview
Feature History for Basic Threat Detection Statistics
Table 51-2
backwards-compatible with multiple platform releases, so the specific ASDM release in which support
was added is not listed.
Table 51-2 Feature History for Basic Threat Detection Statistics
Feature Name
Basic threat detection statistics
Burst rate interval changed to 1/30th of the
average rate.
Improved memory usage
Cisco ASA 5500 Series Configuration Guide using ASDM
51-4
Purpose
Displays basic threat detection statistics.
For a description of each event type, see the
Threat Detection Statistics" section on page
lists each feature change and the platform release in which it was implemented. ASDM is
Platform
Releases
8.0(2)
8.2(1)
8.3(1)
Chapter 51
Feature Information
Basic threat detection statistics was introduced.
The following screen was introduced: Configuration >
Firewall > Threat Detection, Home > Firewall Dashboard >
Traffic Overview.
In earlier releases, the burst rate interval was 1/60th of the
average rate. To maximize memory usage, the sampling
interval was reduced to 30 times during the average rate.
The memory usage for threat detection was improved.
Configuring Threat Detection
"Information About Basic
51-2.
OL-20339-01