Connecting Interface Cables On The Asa 5500, Asa 5510, Asa 5520, And Asa 5540 Platforms - Cisco 5510 - ASA SSL / IPsec VPN Edition Getting Started Manual

Connecting Interface Cables on the
ASA 5500, ASA 5510, ASA 5520, and
ASA 5540 Platforms
This chapter does not apply to the ASA 5550.
Note
This chapter describes how to connect the cables to the Console, Auxiliary,
Management, 4GE SSM, and SSM ports. In this document, SSM refers to an
intelligent SSM, the AIP SSM, or CSC SSM.
Note The 4GE SSM, AIP SSM, and CSC SSM are optional security services modules.
If your adaptive security appliance does not include these modules, continue with
Chapter 7, "Configuring the Adaptive Security Appliance."
Warning Only trained and qualified personnel should install, replace, or service this
equipment
Read the safety warnings in the Regulatory Compliance and Safety Information
Caution
for the Cisco ASA 5500 Series and follow proper safety procedures when
performing these steps.
78-19186-01
Statement 49
.
C H A P T E R
Cisco ASA 5500 Series Getting Started Guide
6
6-1