Disconnect Power Cords; Accessing Server Components - Oracle SPARC T8-1 Service Manual

Disconnect Power Cords

Disconnect Power Cords
Remove the power cords from the server only after powering off the server.
Unplug all power cords from the server.
Caution -
power cords before accessing any cold-serviceable components.
Related Information
"Safety Information" on page 39
■
"Power Off the Server (Oracle ILOM)" on page 46
■
"Power Off the Server (Server Power Button - Graceful)" on page 47
■
"Power Off the Server (Emergency Shutdown)" on page 47
■
"Rear Panel Components" on page 13
■

Accessing Server Components

These topics explain how to access components on the outside and the inside of the server.
Perform these tasks in this order, as needed.
"Prevent ESD Damage" on page 49
■
"Extend the Server to the Service Position" on page 49
■
"Release the CMA" on page 51
■
"Remove the Server From the Rack" on page 52
■
"Remove the Top Cover" on page 53
■
"Open and Remove the Airflow Cover" on page 54
■
"Remove the Fan Cover" on page 55
■
Related Information
"Safety Information" on page 39
■
48 SPARC T8-1 Server Service Manual • January 2022
Because 3.3V standby power is always present in the server, you must unplug the