Create Snmp View; Delete Snmp View - D-Link DGS-1210/ME series Reference Manual

Total Entries: 4
DGS-1210-28P/ME:5#

create snmp view

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create an SNMP view:
DGS-1210-28P/ME:5# create snmp view dlink 1.3.6 1.1.1 view_type excluded
Command: create snmp view dlink 1.3.6 1.1.1 view_type excluded
Success.
DGS-1210-28P/ME:5#

delete snmp view

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
To assign views to community strings to limit which MIB objects an
SNMP manager can access.
create snmp view <view_name 32> <oid 32> <oid_mask 32
view_type [included | excluded]
The create snmp view command assigns views to community
strings to limit which MIB objects an SNMP manager can access.
<view_name 32> − A string of up to 30 alphanumeric characters that
identifies the SNMP view to be created.
<oid 32> − The object ID that identifies an object tree (MIB tree) to
be included or excluded from access by an SNMP manager.
<oid_mask 32> − The object ID mask that identifies an object tree
(MIB tree) to be included or excluded from access by an SNMP
manager.
included − IncluDGS this object in the list of objects that an SNMP
manager can access.
excluded − ExcluDGS this object from the list of objects that an
SNMP manager can access.
Only administrator, operate or power user-level users can issue this
command.
To remove an SNMP view entry previously created on the Switch.
delete snmp view <view_name 32> <oid 32>
The delete snmp view command removes an SNMP view
previously created on the Switch.
<view_name 32> − A string of up to 32 alphanumeric characters that
identifies the SNMP view to be deleted.
<oid 32> − The object ID that identifies an object tree (MIB tree) that
is deleted from the Switch.
Only administrator, operate or power user-level users can issue this
command.
82