Clear Ethernet_Oam Ports - D-Link DGS-1210/ME series Reference Manual

-----------------------------------------------------------------------
Event Listing
Index Type
----- ------------------------------------------ -------------
Local Event Statistics
Error Symbol Event
Error Frame Event
Error Frame Period Event
Errored Frame Seconds Event
Dying Gasp
Critical Event
Remote Event Statistics
Error Symbol Event
Error Frame Event
Error Frame Period Event
Errored Frame Seconds Event
Dying Gasp
Critical Event
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a ALL

clear ethernet_oam ports

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To clear port 1 OAM statistics:
DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
Used to clear Ehternet OAM event log or statistics.
clear ethernet_oam ports [<portlist> | all] [event_log |
statistics]
The clear ethernet_oam ports command is used to clear ports
Ethernet OAM event log or statistics information.
[<portlist> | all] − Specifies a port, a range of ports or all ports
information to be cleared.
[event_log | statistics] − Specifies event log or statistics information
to be cleared.
Only administrator or operator-level users can issue this command.
DGS-1210-28P/ME:5# clear ethernet_oam ports 1 statistics
Command: clear ethernet_oam ports 1 statistics
Success.
DGS-1210-28P/ME:5#
Location Time Stamp
---------------------
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
279