DGS-1210-28P/ME:5# show mac_based_access_control_local
Command: show mac_based_access_control_local
ID
MAC Address
Vlan ID
Success.
DGS-1210-28P/ME:5#
show mac_based_access_control auth_state ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display mac based access control auth state:
DGS-1210-28P/ME:5# show mac_based_access_control auth_state ports 1-28
Command: show mac_based_access_control auth_state ports 1-28
Empty Entry
Success.
DGS-1210-28P/ME:5#
delete mac_based_access_control_local
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
: 1
: 00-11-22-33-44-55
: 1
To display mac_based_access_control authentication status.
show mac_based_access_control_local auth_state ports
[<portlist> | all]
The show mac_based_access_control_local auth_state ports
command
is
authentication status.
[<portlist> | all] – Specifies a range of ports or all ports to be
displayed the MAC-based Access Control port state.
None.
To delete the local database entry.
delete mac_based_access_control_local mac_address
<mac_addr> vlanid <int 1-4094>
The delete mac_based_access_control_local command is used
to delete the local database entry.
<mac_addr> - .Specifies MAC address that accesses accept by
local mode.
vlanid <int 1-4094> - Specifies the MAC address of the specified
VLAN ID to be deleted.
Only administrator or operator-level users can issue this command.
used
to
display
244
mac_based_access_control