Clear Mld_Snooping Data_Driven_Group; Show Mld_Snooping - D-Link DGS-1210/ME series Reference Manual

To enable the data driven learning of an MLD snooping group on the default VLAN:
ES-1210-28/ME:5# config mld_snooping data_driven_learning vlan_name default
state enable
Command: config mld_snooping data_driven_learning vlan_name default state
enable
Success !
DGS-1210-28P/ME:5#

clear mld_snooping data_driven_group

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To clear MLD snooping data driven group:
DGS-1210-28P/ME:5# clear mld_snooping data_driven_group vlan_name rd1
Command: clear mld_snooping data_driven_group vlan_name rd1
Success.
DGS-1210-28P/ME:5#

show mld_snooping

Purpose
Syntax
Description
Parameters
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
To clear the mld snooping data driven group on the Switch.
clear mld_snooping data_driven_group [vlan_name <string 32>
| vlanid <vidlist> | all] {<ipv6_addr> | all}
The clear mld_snooping data_driven_group command used to
clear the mld snooping data driven group on the Switch.
vlan_name <string 32> – Clear that the mld snooping applies only to
this previously created VLAN.
vlanid <vidlist> – Clear that the mld snooping applies only to this
previously created VLAN id.
all – Clear that MLD snooping is to be configured for all VLANs on
the Switch.
{<ipv6_addr> | all} – Specifies the IPv6 address or all of mld
snooping data driven group to be removed.
Only administrator–level users can issue this command.
To display mld snooping settings on the Switch.
show mld_snooping [vlan_name <string 32> | vlanid <vidlist> |
all]
The show mld snooping command displays a port from being
defined as a multicast router port by static configuration or by
automatic learning.
vlan_name <string 32> – Displays that the mld snooping applies
only to this previously created VLAN.
vlanid <vidlist> – Displays that the mld snooping applies only to this
previously created VLAN id.
all – Displays that MLD snooping which configured for all VLANs on
316