show pppoe circuit_id_insertion
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view the global PPPoE ID insertion state:
show pppoe circuit_id_insertion ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view the PPPoE circuit ID configuration for ports 1 to 3:
DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
Used to display the PPPoE circuit identifier insertion status for the
Switch.
show pppoe circuit_id_insertion
The show pppoe circuit_id_insertion command is used to display
the global state configuration of the PPPoE circuit ID insertion
function.
None.
None.
DGS-1210-28P/ME:5# show pppoe circuit_id_insertion
Command: show pppoe circuit_id_insertion
Status: Enabled
DGS-1210-28P/ME:5#
Used to display the PPPoE ID insertion configuration on a per
port basis.
show pppoe circuit_id_insertion ports {<portlist>}
The show pppoe circuit_id_insertion ports command allows
the user to view the configuration of PPPoE ID insertion for each
port.
<portlist> - Specifies which ports to display. If no ports are
specified, all ports configuration will be listed.
None.
DGS-1210-28P/ME:5# show pppoe circuit_id_insertion ports 1-3
Command: show pppoe circuit_id_insertion ports 1-3
Port State
PPPoE Tags
------ ------------ ---------------------------------------------
1
Enabled Circuit ID : UDF String (343)
Remote ID : Default
2
Enabled Circuit ID : UDF String (343)
Remote ID : Default
3
Enabled Circuit ID : UDF String (343)
Remote ID : Default
DGS-1210-28P/ME:5#
61