Enable Mld_Snooping; Disable Mld_Snooping - D-Link DGS-1210/ME series Reference Manual

Command
show mld_snooping
mrouter_ports
show mld_snooping
host
Each command is listed in detail, as follows:

enable mld_snooping

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable the MLD snooping:
DGS-1210-28P/ME:5# enable mld_snooping
Command: enable mld_snooping
Success.
DGS-1210-28P/ME:5#

disable mld_snooping

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable the MLD snooping:
DGS-1210-28P/ME:5# disable mld_snooping
Command: disable mld_snooping
Success.
DGS-1210-28P/ME:5#
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
Parameter
[vlan_name <string 32> | vlanid <vidlist> | all ] [dynamic | static]
[vlan_name <string 32> | vlanid <vidlist> | all | ports <portlist> | group
<ipv6_addr>]
To enable MLD snooping on the Switch.
enable mld snooping {multicast_vlan | forward_mcrouter_only}
The enable mld snooping command enables MLD snooping on the
Switch.
{multicast_vlan | forward_mcrouter_only} − Enables the multicast
VLAN or forward mcrouter for MLD Snooping on the Switch.
Only administrator, operator or power user–level users can issue
this command.
To disable MLD snooping on the Switch.
disable mld snooping {multicast_vlan | forward_mcrouter_only}
The disable mld snooping command disables MLD snooping on
the Switch.
{multicast_vlan | forward_mcrouter_only} − Disables the multicast
VLAN or forward mcrouter for MLD Snooping on the Switch.
Only administrator, operator or power user–level users can issue
this command.
308