D-Link DGS-1210/ME series Reference Manual page 205

Command
protocol_mapping
config cos
vlanid_mapping
show cos
vlanid_mapping
delete cos
vlanid_mapping
config cos tos value
show cos tos
config cos
tcp_port_mapping
show cos
tcp_port_mapping
delete cos
tcp_port_mapping
config cos
udp_port_mapping
show cos
udp_port_mapping
delete cos
udp_port_mapping
config 802.1p
user_priority
show 802.1p
user_priority
config 802.1p
default_priority
show 802.1p
default_priority
config
scheduling_mechanism
show
scheduling_mechanism
config [dscp | tos]
mode
config dscp_mapping
show dscp_mapping
Each command is listed in detail, as follows:
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
Parameter
vid <vlanid 1-4094> class <class_id 0-7>
{vid <vlanid 1-4094>}
vid <vlanid 1-4094>
<value 0-7> class <priority_id 0-7>
{value <value 0-7>}
destination_port <value 0-65535> class <class_id 0-7>
{destination_port <value 0-65535>}
destination_port <value 0-65535>
destination_port <value 0-65535> class <class_id 0-7>
{destination_port <value 0-65535>}
destination_port <value 0-65535>
<priority 0-7> <class_id 0-7>
[<portlist> | all] <priority 0-7>
{<portlist>}
[strict | wrr]
dscp_value <value 0-63> class <priority 0-7>
{dscp_value <value 0-63>}
188