Show Flood_Fdb; Clear Flood_Fdb - D-Link DGS-1210/ME series Reference Manual

Syntax
Description
Parameters
Restrictions
Example usage:
To configure FDB dynamic entries:

show flood_fdb

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display FDB dynamic entries:

clear flood_fdb

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
config flood_fdb [log | trap] [enable | disable]
The config flood_fdb command configures dynamically learned
entries from the Switch's forwarding database.
None.
Only Administrator or operator-level users can issue this command.
DGS-1210-28P/ME:5# config flood_fdb trap disable log enable
Command: config flood_fdb trap disable log enable
Success.
DGS-1210-28P/ME:5#
To display the Switch's forwarding database on the Switch.
show flood_fdb
The show flood_fdb command displays dynamically learned entries
from the Switch's forwarding database.
None.
None.
DGS-1210-28P/ME:5# show flood_fdb
Command: show flood_fdb
Flooding FDB State : Enabled
Log State : Disabled
Trap State : Disabled
Value VLAN ID MAC Address
--------- ------------ -------------------
DGS-1210-28P/ME:5#
To clear the Switch's forwarding database of all dynamically learned
MAC addresses.
clear flood_fdb
The clear flood_fdb command clears dynamically learned entries
from the Switch's forwarding database.
None.
Only Administrator or operator-level users can issue this command.
Time stamp
------------------
177