Config Snmp System_Contact; Config Snmp System_Location; Config Snmp System_Name - D-Link DGS-1210/ME series Reference Manual

CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a ALL

config snmp system_contact

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the Switch contact to "MIS":

config snmp system_location

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the Switch location to "HQ":

config snmp system_name

Purpose
Syntax
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
To enter the name of a contact person who is responsible for the
Switch.
config snmp system_contact <string 128>
The config snmp system_contact command is used to enter the
name and/or other information to identify a contact person who is
responsible for the Switch. A maximum of 128 character can be
used.
<string 128> − A maximum of 128 characters is allowed. A NULL
string is accepted if there is no contact.
Only Administrator or operator-level users can issue this command.
DGS-1210-28P/ME:5# config snmp system_contact MIS
Command: config snmp system_contact MIS
Success.
DGS-1210-28P/ME:5#
To enter a Description of the location of the Switch.
config snmp system_location <string 128>
The config snmp system_ location command is used to enter a
Description of the location of the Switch. A maximum of 20
characters can be used.
<string 128> − A maximum of 128 characters is allowed. A NULL
string is accepted if there is no location DGSired.
Only Administrator or operator-level users can issue this command.
DGS-1210-28P/ME:5# config snmp system_location HQ
Command: config snmp system_location HQ
Success.
DGS-1210-28P/ME:5#
To configure the name of the location of the Switch.
config snmp system_name <string 128>
102