Traceroute6 - D-Link DGS-1210/ME series Reference Manual

Tracing Route to 10.90.90.92 with 10 hops max and 1 byte packets
[!N - Network Unreachable !H - Host Unreachable !P - Protocol Unreachable]
1 0.0.0.0
2 0.0.0.0
3 0.0.0.0
4 0.0.0.0
5 0.0.0.0
6 0.0.0.0
7 0.0.0.0
8 0.0.0.0
9 0.0.0.0
10 0.0.0.0
DGS-1210-28P/ME:5#

traceroute6

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To trace route IPv6 3000::2 with max-ttl is 8:
DGS-1210-28P/ME:5# traceroute6 3000::2 max-ttl 8
Command: traceroute6 3000::2 max-ttl 8
Tracing Route to 3000::2 with 8 hops max and 1 byte packets
[!N - Network Unreachable !H - Host Unreachable !P - Protocol Unreachable]
1 ::
2 ::
3 ::
4 ::
5 ::
6 ::
7 ::
8 ::
DGS-1210-28P/ME:5#
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
*
*
*
*
*
*
*
*
*
*
The traceroute User EXEC mode command discovers routes that
packets actually take when traveling to their destination.
traceroute6 <ipv6_addr> {[max-ttl <short 1-99> | min-ttl <short
1-99>}
The traceroute6 command discovers routes that packets actually
take when traveling to their destination.
<ipv6_addr> - Specifies the IPv6 address of the destination host.
max-ttl <short 1-99> - The largest TTL value that can be used.
The traceroute command
reached or when this value is reached.
min-ttl <short 1-99> - The smallest TTL value that can be used.
The traceroute command
reached or when this value is reached.
Only Administrator or operate-level users can issue this command.
*
*
*
*
*
*
*
*
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
terminates when the
terminates when the
* *
* *
* *
* *
* *
* *
* *
* *
30
destination is
destination is