Show Cos Tcp_Port_Mapping; Delete Cos Tcp_Port_Mapping - D-Link DGS-1210/ME series Reference Manual

Parameters
Restrictions
Example usage:
To configure the CoS TCP port mapping on the Switch:
DGS-1210-28P/ME:5# config cos tcp_port_mapping destination_port 500
class 1
Command: config cos tcp_port_mapping destination_port 500 class 1
Success.
DGS-1210-28P/ME:5#

show cos tcp_port_mapping

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the CoS TCP port mapping on the Switch:

delete cos tcp_port_mapping

Purpose
Syntax
Description
Parameters
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
<value 0-65535> - Specifies the tcp port number to be mapped.
<class_id 0-7> - Specifies the number of the Switch's hardware
priority queue.
Only administrator or operator-level users can issue this command.
To displays the CoS TCP port mapping information on the Switch.
show cos tcp_port_mapping {destination_port <value 0-65535>}
The show cos tcp_port_mapping command is used to display the
CoS TCP port mapping information on the Switch.
<value 0-65535> - Specifies the mapped tcp port information to be
displayed.
None.
DGS-1210-28P/ME:5# show cos tcp_port_mapping
Command: show cos tcp_port_mapping
TCP Port Class
--------------------------------
500 1
DGS-1210-28P/ME:5#
To delete the CoS TCP port mapping information on the Switch.
delete cos tcp_port_mapping destination_port <value 0-65535>
The delete cos tcp_port_mapping command is used to delete the
CoS TCP port mapping information on the Switch.
<value 0-65535> - Specifies the mapped tcp port information to be
deleted.
202