Disable Asymmetric_Vlan; Show Asymmetric_Vlan; Enable Pvid Auto_Assign - D-Link DGS-1210/ME series Reference Manual

Example usage:
To enable Asymettric VLAN on the switch:

disable asymmetric_vlan

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable asymmetric_vlan on the switch:

show asymmetric_vlan

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display Asymmetric VLAN status:

enable pvid auto_assign

Purpose
Syntax
DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
DGS-1210-28P/ME:5# enable asymmetric_vlan
Command: enable asymmetric_vlan
Success.
DGS-1210-28P/ME:5#
To disable Asymmetric VLAN on the switch.
disable asymmetric_vlan
The disable asymmetric_vlan command, along with the enable
asymmetric_vlan command below, is used to disable and enable
Asymmetric VLAN on the Switch.
None.
Only administrator or operator-level users can issue this command.
DGS-1210-28P/ME:5# disable asymmetric_vlan
Command: disable asymmetric_vlan
Success.
DGS-1210-28P/ME:5#
To display the Asymmetric VLAN status on the Switch.
show asymmetric_vlan
The show asymmetric_vlan command displays the Asymmetric
VLAN status on the Switch.
None.
None.
DGS-1210-28P/ME:5# show asymmetric_vlan
Command: show asymmetric_vlan
Asymmetric VLAN : Enable
DGS-1210-28P/ME:5#
To enable auto assignment of PVID.
enable pvid auto_assign
233