Engine Installation; Note - Honda XR70R Service Manual

ENGINE REMOVAL/INSTALLATION
Loosen the engine hanger bolts/nuts.
Support the engine using a jack or other adjustable
support to ease of engine hanger bolts removal.
Remove the engine hanger bolts and engine from
the frame.
ENGINE INSTALLATION
The lower engine
hanger bolt
has
8
sprmg
hook.
6-4
NOTE :
• Note the direction of the hanger bolts .
• Use a floor jack or other adjustable support to
carefully maneuver the engine into place.
Place the engine into the frame , and install the
engine hanger bolts from the left side.
CAUTION:
Be ca reful not to dam age the frame.
Install the spring washers and nuts, then tighten
the nuts to the specified torque.
TORQUE: 31 N·m (3.2 kgf.m , 23 Ibf·ft)
Hook the brake pedal return spring to the tip of the
lower engine hanger bolt as shown.