Downloading Firmware - Paradyne 8779 User Manual

3. Initial Startup and Configuration

Downloading Firmware

The Download Code screen allows you to download firmware from a TFTP server
or MCP FFS. To access the Download Code screen, follow this menu selection
sequence:
Procedure
To download firmware:
3-12
Main Menu Control
main/control/download_code
Slot: 4
Port: 1
Image File Name:
TFTP Server IP Address:
Destination:
Immediately Apply Download:
Start Transfer:
Packets Sent:
Packets Received:
Bytes Sent:
Bytes Received:
Transfer Status:
-------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu
1. Position the cursor in the Image File Name field. Type the name of the file to
be downloaded.
The file name may be a regular path name expression of directory names
separated by a forward slash (/) ending with the file name. The total path
name length can be up to 128 characters.
2. Position the cursor in the TFTP Server IP Address field. Enter the TFTP server
IP address or M1 for the MCP FFS.
3. For an LTU, go to Step
field. Use the spacebar to select a network destination for the TFTP server.
Select one of the following:
— DSL if the TFTP server destination is the EOC.
— IMC if the TFTP destination is via the MCP.
4. Position the cursor in the Immediately Apply Download field. If you would like
the download to be effective immediately, select Yes.
May 2002
Download Code
DOWNLOAD CODE
IP 000.000.000.000
DSL
Yes
No
0000000
0000000
0000000
0000000
Transfer Pending
4. For an NTU, position the cursor in the Destination
Model: 87xx
Clear
Clear
MainMenu Exit
8700-A2-GB20-40