Setting Cross-Connect Mode - Paradyne 8779 User Manual

A. Configuration Options

Setting Cross-Connect Mode

For Cross-Connect Mode configuration options for Model 8777, refer to
Cross-Connect Mode Options – Model
configuration options for Model 8779, refer to
Options – Model
menu selection sequence:
The following screen is displayed for Model 8777:
A-20
8779. To access the Set Cross-Connect Mode screen, follow this
Main Menu Configuration
Set Cross-Connect Mode
main/config/xconnect_mode
Slot: 18
DSX-1 Port
--------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu
Save
May 2002
8777. For Cross-Connect Mode
Table A-10, Cross-Connect Mode
Current Configuration
CROSS-CONNECT MODE
MODE
1 DS1 Bypass
2 DS1 Bypass
3 DS1 Bypass
4 DS1 Bypass
5 DS1 Bypass
6 DS1 Bypass
7 DS1 Bypass
8 DS1 Bypass
Assign_DS0s
Table A-9,
Cross-Connect
Model: 8777
DSL Port
1
2
3
4
5
6
7
8
MainMenu Exit
Clear_All
8700-A2-GB20-40