Paradyne 8779 User Manual page 122

A. Configuration Options
Table A-11. Assign Time Slots Options (1 of 2)
A-26
DSX-1/DSL or G.703/DSL
Possible Settings (Model 8777): DSX-1, DSL
Default Setting: DSX-1
Possible Settings (Model 8779): G.703, DSL
Default Setting: G.703
Determines the port for which time slots are displayed. The unit can be configured
using the viewpoint of the DSX-1 or G.703 interface, or the DSL network interface.
or
DSX-1 G.703 – Time slots for the specified DTE port are displayed.
DSL – Time slots for the specified DSL port are displayed.
Port Type
Possible Settings (Model 8777): D, X
Default Setting: D
Possible Settings (Model 8779): D, G
Default Setting: D
Shows the type of port to which this time slot is connected.
D – The time slot is connected to a DSL port.
G – The time slot is connected to a G.703 port (Model 8779).
X – The time slot is connected to a DSX-1 port (Model 8777).
I (Model 8779 only)– The time slot is connected to an Inband Management Channel
(IBMC) (read only).
Port
Possible Settings: 1 – 8
Default Setting: [Blank]
Selects the port to which this time slot is connected.
1 – 8 – The port number is specified.
DS0s to Allocate
Possible Settings (Model 8777): 1 – 24
Default Setting: [Blank]
Possible Settings (Model 8779): 1 – 31
Default Setting: [Blank]
Specifies the number of contiguous time slots to be assigned at this time for the selected
port. Only unassigned time slots can be selected.
1 – 31 – The number of time slots to be assigned is specified.
May 2002 8700-A2-GB20-40