Paradyne 8779 User Manual page 125

Tdm sdsl termination units
Table of Contents

Advertisement

A. Configuration Options
Table A-12. Telnet Session Options
Telnet Session
Possible Settings: Enable, Disable
Default Setting: Enable
Specifies if the unit will respond to a Telnet session request from a Telnet client on an
interconnected IP network.
Enable – Allows Telnet sessions between the unit and a Telnet client.
Disable – No Telnet sessions allowed.
Telnet Login Required
Possible Settings: Enable, Disable
Default Setting: Disable
Specifies whether a user ID and password are required to access to the ATI through a
Telnet session. Login IDs are created with a password and access level. Refer to
Creating
a Login
in Chapter 6, Security .
Enable – Security is enabled. When access is attempted via Telnet, the user is prompted
for a Login ID and password.
Disable – No Login required for a Telnet session.
Session Access Level
Possible Settings: Administrator, Operator
Default Setting: Administrator
The Telnet session access level is interrelated with the access level of the Login ID. Refer
to
ATI Access Levels
in Chapter 6, Security , for more information.
Administrator – This is the higher access level, permitting full control of the 87xx
Termination Unit. Access level is determined by the Login ID. If Telnet Login Required is
disabled, the session access level is Administrator.
Operator – This is the lower access level, permitting read-only access to status and
configuration screens.
Inactivity Timeout
Possible Settings: Enable, Disable
Default Setting: Disable
Provides automatic logoff of a Telnet session.
Enable – The Telnet session terminates automatically after the Disconnect Time.
Disable – A Telnet session will not be closed due to inactivity.
Disconnect Time (Minutes)
Possible Settings: 1 – 60
Default Setting: 5
Number of minutes of inactivity before a Telnet session terminates automatically. Timeout
is based on no keyboard activity.
T
Disconnect Time (minutes) option only appears when Inactivity Timeout is enabled.
1 – 60 – The Telnet session is closed after the selected number of minutes.
A-29
8700-A2-GB20-40
May 2002

Advertisement

Table of Contents
loading

This manual is also suitable for:

U87778777

Table of Contents