Paradyne 8779 User Manual page 147

8610/8620 and 8810/8820 DSLAM Telco 50-pin Connector Pinouts
The Telco 50-pin connectors on the rear of the DSLAM chassis (numbered 1– 3 in
the 8610/8620 DSLAMs and 1–18 in the 8810/8820 DSLAMs) provide the 2-wire
loop interface from each DSL port to either the POTS splitter shelf or, if the loop is
not being shared with POTS, then to the Main Distribution Frame (MDF). The
following table lists the pin assignments for each of these interfaces.
Table C-2.
8700-A2-GB20-40
Rear Connector Pinouts
Connector Pins
Port (Tip, Ring)
Port 1 1, 26
Port 2 2, 27
Port 3 3, 28
Port 4 4, 29
Port 5 5, 30
Port 6 6, 31
Port 7 7, 32
Port 8 8, 33
May 2002
C. Connector Pin Assignments
C-3