Restoring Access To The User Interface; Resetting The Device - Paradyne 8779 User Manual

3. Initial Startup and Configuration

Restoring Access to the User Interface

Improper configuration of the unit could render the user interface inaccessible. If
this occurs, access can be restored using the management card of the DSLAM.
Procedure
To reset the DSL Card using the DSLAM's management card:

Resetting the Device

If the user interface is functional and you would like to reset the card without
removing the card from the DSLAM, follow this procedure.
Procedure
To reset the card using the Control branch:
3-10
1. Follow this menu selection sequence:
Configuration DSL Cards
2. Enter DSL nn , where nn is the slot number for the DSL card you wish to reset.
3. Enter Reset.
4. Enter Y if you want to clear NVRAM also, otherwise enter N.
5. Enter Y at the prompt to confirm.
NOTE:
When you enter Y, all data connectivity is interrupted.
1. Follow this menu selection sequence:
Main Menu Control
2. The message Are you sure? appears.
3. Enter Yes.
May 2002
Reset Slot
Reset Device
8700-A2-GB20-40