Paradyne 8779 User Manual page 136

A. Configuration Options
A-40
The Cross Connect Mode screen appears.
main/config/xConnect_mode
Slot: 18
Source
G.703
--------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu
Save
5. Configure the G.703 port to be used for Inband Management to DS0
Cross-connect and save your changes.
6. Use the Inband Management Channel screen on the 8779 unit to configure
Inband Management. From the 8779 unit, follow this menu selection
sequence:
Main Menu Configuration
Management and Communication
main/config/management/inband
Slot: 4
INBAND MANAGEMENT CHANNEL
Inband Management Select:
Inband Management Type:
Inband Management Port:
Inband Management Time Slot:
-------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu
Save
May 2002
CROSS CONNECT MODE
MODE
1 DS0 Cross-connect
2 DS0 Cross-connect
3 DS0 Cross-connect
4 DS0 Cross-connect
5 DS0 Cross-connect
6 DS0 Cross-connect
7 DS0 Cross-connect
8 DS0 Cross-connect
Assign_DS0s
Current Configuration
Inband Management Channel
Enable
PPP
1
1
Model: 8779
Destination
DSL
Unassigned
Unassigned
Unassigned
Unassigned
Unassigned
Unassigned
Unassigned
Unassigned
MainMenu Exit
Clear_All
Model: 8779
MainMenu Exit
8700-A2-GB20-40