Configuring The Unit; Configuration Options - Paradyne 8779 User Manual

Procedure
To enter Change Identity screen information:

Configuring the Unit

Configuration option settings determine how the termination unit operates. Use the
Configuration branch menu to display or change configuration option settings.

Configuration Options

The termination unit is shipped with factory settings in the Default Factory
Configuration area. You can find default information by:
T
T
The termination unit has two sets of configuration option settings.
The Current Configuration matches the Default Factory Configuration until
modified and saved by the user. If the factory default settings do not support your
network's configuration, you can customize the configuration options for your
application.
8700-A2-GB20-40
1. Position the cursor in the System Name field. Enter a name unique in your
network to identify the SNMP managed node (or unit)
2. Position the cursor in the System Location field. Enter the physical location of
the unit.
3. Position the cursor in the System Contact field. Enter the name and contact
information for the person responsible for the unit.
4. Press Ctrl-a to switch to the function key and message area below the dotted
line.
5. Select Save and press Enter. Command Complete appears.
Referring to Appendix A, Configuration Options
Accessing the Configuration branch of the termination unit's menu.
Configuration Option Area
Current Configuration
Default Factory Configuration
May 2002
3. Initial Startup and Configuration
.
Configuration Option Set
The unit's currently active set of configuration options.
A read-only configuration area containing the factory
default configuration options.
3-3