Paradyne 8779 User Manual page 60

7. Monitoring and Troubleshooting
Table 7-2.
7-8
Self-Test Results Messages (2 of 2)
Message What Message Indicates
FPGA Failed The Field Programmable
Gate Array serving all ports
failed.
G.703 Failed, Pt 1 The unit failed to loop data on
the G.703 on Port n .
Memory The unit failed memory data
Test n Fail
verification (Test 1) or
memory address verification
(Test 2).
Passed No errors were detected.
PLD Failed, Pt n An error was detected in a
Programmable Logic Device.
TSI CPLD Fail The Complex Programmable
Logic Device serving the
Timeslot Interchanger failed.
TSI Fail The Timeslot Interchanger
failed.
May 2002
What To Do
1. Reset the unit and try again.
2. Call your service
representative for
assistance.
No action is needed.
1. Reset the unit and try again.
2. Call your service
representative for
assistance.
8700-A2-GB20-40