Paradyne 8779 User Manual page 178

Index
cross-connection
example, 4-2
procedures, 4-1
customer configuration areas, 3-3
D
Data Path Failure, self-test result, 7-7
data/voice time slot assignment, A-27
default configuration area, 3-3
delete login ID, 6-4
Destination, A-23
device
messages, 7-10
name, 3-2
reset, 3-10
dimensions, D-1
Disconnect Time for Telnet session, A-29
documents, related, vi
DOS, TFTP server on, 3-7, 9-4
Download
configuration, 9-4
Failed status message, 7-3
firmware, 9-1
DSL
Framer x Fail, self-test result, 7-7
line rate
AutoRate ceiling, A-3
Network Interface option, A-3
Port, A-22
LEDs, 7-24
DSL Line Rate
and payload rate, A-6
Fixed Rate, A-6
DSLAM
defined, 1-2
exiting from session, 2-9
login, 2-2
DSX-1
Failed, self-test result, 7-7
Interface Options, A-7
Excessive Error Rate Threshold, A-8
Line Coding, A-7
Line Equalization, A-8
Line Framing, A-8
Port Status, A-7
Primary Clock Source, A-8
port LEDs, 7-24
DTE
Framer x Fail, self-test result, 7-7
LIU x Fail, self-test message, 7-7
LIU x Fail, self-test result, 7-7
loopback, 8-6
IN-2
E
EER (Excessive Error Rate)
status message, 7-3
effective access level, 6-2
EIA-530 Payload Rate, A-4
ending an ATI session, 2-9
Enterprise
SNMP traps, B-4
Specific Traps, A-36
environment requirements, D-1
error
messages, line 24, 7-10
statistics, 7-12
Excessive Error Rate (EER) Threshold
DSL network, A-3
DSX-1, A-8
F
factory defaults, 3-3
Failure
self-test result, 7-7
features, 1-2
firmware download from server, 9-1
FPGA Failed, self-test result, 7-8
framing
DS0 Cross Connect, A-5
DSX-1, A-8
G.703, A-10
function keys, 2-7
G
G.703
Failed, self-test result, 7-8
interface impedance, A-14
Interface Option settings, A-9
Line Coding, A-10
Line Framing, A-10
Primary Clock Source, A-11
Time Slot 16, A-10
Line Termination, A-14
General Traps, A-36
H
health and status messages, 7-3
I
identity, 3-2
impedance, A-14
inactivity timeout
for Telnet session, A-29
May 2002 8700-A2-GB20-40