Paradyne 8779 User Manual page 143

8700-A2-GB20-40
SNMP Trap
enterpriseFallback
AutoRate(13)
enterprisePrimaryClockFail
Clear(101)
enterpriseSecondaryClock
FailClear(104)
enterpriseTestStop(105)
enterpriseFallback
AutoRateClear(113)
May 2002
B. Standards Compliance for SNMP Traps
Description
After a loss of signal, the
unit resynchronized to a
lower rate than the last
known rate.
Variable bindings:
T
ifIndex (RFC 2863)
T
ifAdminStatus
(RFC 2863)
T
ifOperStatus (RFC 2863)
T
ifType (RFC 2863)
The LTU has recovered and
is using its primary clock
source.
No variable bindings.
The LTU has recovered and
is using its secondary clock
source.
No variable bindings.
All tests have been halted.
Variable bindings:
T
ifIndex (RFC 2863)
T
ifAdminStatus
(RFC 2863)
T
ifOperStatus (RFC 2863)
T
ifType (RFC 2863)
T
ifTestType (RFC 2863)
After an AutoRate fallback
condition, the unit
resynchronized to the last
known rate.
Variable bindings:
T
ifIndex (RFC 2863)
T
ifAdminStatus
(RFC 2863)
T
ifOperStatus (RFC 2863)
T
ifType (RFC 2863)
Possible Cause
Variable line conditions.
All tests on an interface have
been stopped by timeout or
an Abort All Tests command.
B-5