Testing; Accessing The Test Menu - Paradyne 8779 User Manual

Testing

Accessing the Test Menu

From the Test menu, you can run network tests, data port tests, and a front panel
lamp test.
To access the Test menu, follow this menu selection sequence:
8700-A2-GB20-40
Main Menu Test
main/test
Slot: 18
Network & DSX-1 | G.703 Tests
Device Tests
Abort All Tests
--------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu
Select . . .
Network & DSX-1 Tests
Network & G.703 Tests
Device Tests
Abort All Tests
May 2002
TEST
To . . .
Start and stop tests on the DSX-1, G.703, or network
interface.
Start and stop the Lamp Test.
To abort current tests excluding network-initiated loopback
tests. An aborted test may continue to run for a few
seconds as the abort command is sent to the remote end
and processed.
8
Model: 87xx
MainMenu Exit
8-1