A. Configuration Options
Management and Communication Options Menu
The Management and Communication Menu allows you to access the following:
T
T
T
T
T
Telnet Session Options
The Telnet Session configuration options control whether a Telnet session is
allowed through an interconnected IP Network. If allowed, these options determine
what level of security to apply to the session to control access. Only one Telnet
session is allowed at a time. Initial values are determined by the configuration you
currently have loaded.
To access the Telnet Sessions Options screen, follow this menu selection
sequence:
A-28
Telnet Session Options
General SNMP Management Options
SNMP NMS Security Options
SNMP Traps Options
(Table
Inband Management Channel Options – Model 8779
NOTE:
Telnet Session is only available for IP Complex systems.
Main Menu
Configuration
Management and Communication
main/config/management/telnet
Slot: 18
Telnet Session:
Telnet Login Required:
Session Access Level:
Inactivity Timeout:
Disconnect Time (Minutes)
--------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu
Save
May 2002
(Table
A-12)
(Table
A-13)
(Table
A-14)
A-15)
Current Configuration
Telnet Session
TELNET SESSION OPTIONS
Enable
Enable
Administrator
Enable
5
(Table
A-16)
Model: 87xx
MainMenu
Exit
8700-A2-GB20-40