Test Status Messages
The Test Status messages in the following table appear in the right column of the
System and Test Status screen.
Table 7-3.
For further information on testing, refer to
8700-A2-GB20-40
Test Status Messages
Test Status Message
Meaning
511 Test Active, Pt n
A 511 Test and Monitor is active on the DSL Port n network
interface.
DLB Test Active, Pt n
A Data Terminal Loopback test is active on Port n .
Lamp Test Active
The Lamp Test is active, causing the LEDs on the front panel
to light.
LLB Test Active, Pt n
A network Line Loopback test is active on Port n .
No Test Active
No tests are currently running.
Remote LLB Dn
A Remote Line Loopback Down command is being sent.
Active, Pt n
Remote LLB Up
A Remote Line Loopback Up command is being sent.
Active, Pt n
RLB Test Active, Pt n
A network Repeater Loopback test is active on Port n .
Telco LLB Active, Pt n
A Telco-initiated Line Loopback is active on the specified
DSX-1 port.
Telco PLB Active, Pt n
A Telco-initiated Payload Loopback is active on the specified
DSX-1 port.
May 2002
7. Monitoring and Troubleshooting
Chapter 8, Testing
.
7-9