Creating A Login - Paradyne 8779 User Manual

Creating a Login

Logins apply to Telnet access directly to the ATI of the Hotwire Termination Unit.
The Administer Logins menu option is not presented when you access the unit
through the management card of the DSLAM and when in IP Conservative mode.
Six login ID/password combinations are available. Each Login ID and Password
must be unique and include an access level.
Procedure
8700-A2-GB20-40
1. To create a login record, follow this menu selection sequence:
Main Menu Control
main/control/admin_logins
Slot: 4
Login ID:
Access Level:
--------------------------------------------------------------------------------
Save PgUp PgDn
2. Select New and press Enter. The Login Entry screen is displayed.
main/control/admin_logins
Slot: 4
Login ID:
Password:
Re-enter Password:
Access Level:
New logins will not become permanent until saved
through the "ADMINISTER LOGINS" screen!
--------------------------------------------------------------------------------
Ctrl-a to access these functions
Save PgUp PgDn
May 2002
Administer Logins
ADMINISTER LOGINS
newuser
Administrator
Are You Sure? Yes
ESC for previous menu
LOGIN ENTRY
newuser
e34t136
e34t136
Administrator
WARNING
ESC for previous menu
6. Security
Model: 87xx
Page 1 of 1
MainMenu Exit
New Delete
Model: 87xx
MainMenu Exit
New Delete
6-3