Setting The Cross-Connect Modes - Paradyne 8779 User Manual

4. Cross-Connecting Ports

Setting the Cross-Connect Modes

To access the Set Cross-Connect Mode screen, follow this menu selection
sequence:
When the screen is first displayed, all ports are set to DS1 Bypass mode. In this
example, Ports 1 and 2 have been changed to DS0 Cross-connect, and
Ports 3 –8 have been changed to DS1 Bypass. Unassigned appears next to
Ports 1 and 2 because time slots associated with the cross-connection have not
yet been assigned.
4-4
Main Menu Configuration
Set Cross-Connect Mode
main/config/xconnect_mode
Slot: 18
DSX-1 Port
1
2
3
4
5
6
7
8
Assign_DS0s
-------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu
Save
May 2002
Current Configuration
CROSS-CONNECT MODE
MODE DSL Port
DS0 Cross-connect Unassigned
DS0 Cross-connect Unassigned
DS1 Bypass 3
DS1 Bypass 4
DS1 Bypass 5
DS1 Bypass 6
DS1 Bypass 7
DS1 Bypass 8
Cross-Connect
Model: 8777
MainMenu Exit
Clear_All
8700-A2-GB20-40