2. Using the Asynchronous Terminal Interface
Switching Between Screen Work Areas
Select Ctrl-a to switch between the two screen work areas to perform all screen
functions.
Procedure
To access the function key and message area below the dotted line:
2-8
1. Press Ctrl-a to switch from the screen area to the function key and message
area below the dotted line.
2. Select either the function's designated (underlined) character or press the Tab
key until you reach the desired function key.
Example:
To save the current options, type s or S (Save ).
3. Press Enter. The function is performed.
4. To return to the screen area above the dotted line, press Ctrl-a again.
main/config/network
Slot: 4
Port: 2
Margin Threshold:
Excessive Error Rate Threshold:
AutoRate:
DSL Line Rate:
Circuit Identifier:
--------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu
Save
May 2002
NETWORK INTERFACE OPTIONS
–3db
1E–5
Disable
1552
Model: 87xx
Clear
MainMenu
Exit
8700-A2-GB20-40