Repeater Loopback - Paradyne 8779 User Manual

Repeater Loopback

A Repeater Loopback (RLB) loops the data normally sent to the DSL port back to
the connected DTE ports.
The DSL port is sent all ones and data received on the DSL link is ignored.
Procedure
To run a Repeater Loopback:
A Repeater Loopback cannot be started when any other loopback test is in
progress.
8700-A2-GB20-40
CAP
DSL
Port
AIS
Transceiver Framer
1. Position the cursor at the Start command next to Repeater Loopback on the
Network & DSX-1 or Network & G.703 Tests screen.
2. Press Enter.
The Start command is changed to Stop. Status is changed to Active.
3. To manually stop the test, verify that the cursor is positioned at the Stop
command.
4. Press Enter.
Status is changed to Inactive.
May 2002
T1/E1
CAP
Framer
LIU
or TSI
8. Testing
DSX-1
or G.703
Port
01-16613-01
8-5