Device Tests
The Device Tests branch is only used to access the card-level test, the Lamp Test.
To access the Device Tests screen, follow this menu selection sequence:
Lamp Test
The Lamp Test determines whether all LEDs are lighting and functioning properly.
Procedure
To test the LEDs:
8700-A2-GB20-40
Main Menu
Test
Device Tests
main/test/card
Test
--------------------------------------------------------------------------------
Lamp Test:
--------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu
1. Position the cursor at the Start command next to Lamp Test on the Device
Tests screen.
2. Press Enter.
The Start command is changed to Stop. During the Lamp Test, all LEDs blink
simultaneously every second.
3. To stop the Lamp Test, position the cursor at the Stop command. The LEDs
are restored to their normal condition.
4. Press Enter.
May 2002
DEVICE TESTS
Command
Status
Start
Inactive
8. Testing
Model: 87xx
MainMenu
Exit
8-9