Specifying The System Software For The Next Startup Of The Router; Establishing The Configuration Task; Specifying The System Software For The Next Startup - Huawei V300R005 Configuration Manual

Quidway NetEngine80
Configuration Guide - Basic Configurations

11.3 Specifying the System Software for the Next Startup

of the Router

11.3.1 Establishing the Configuration Task

Applicable Environment
Specify the same system software to the master and slave MPUs. Otherwise, the system is
broken down.
After the files are uploaded, you need to specify the system to use the newly loaded system
software when the router is restarted next time. It is recommended to use the absolute paths to
specify system software of the same version to the master and slave MPUs.
After the system software is specified, the system uploads the software at the specified path
when the router is restarted next time.
Pre-configuration Tasks
None.
Data Preparation
Before specifying the system software for the next startup of the router, you need to prepare
the absolute path of the system software.
Configuration Procedures
No.
1
2
3
4
11.3.2 Specifying the System Software for the Next Startup
Do as follows on the router to be upgraded:
Step 1 Run:
startup system-software file-name
The system software is specified for starting the master MPU the next time.
Issue 04 (2009-12-20)
Procedure
Specifying the System Software for the Next Startup
(Optional) Configuring PAF Files
(Optional) Configuring Patch Packages
Checking the Configuration
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11 System Software Upgrade
11-5